Guzzi V65 TT exhaust build

Now this exhaust build was an interesting challenge, as all I had was a badly scanned photography of the old factory V65TT-C.

The first tricky part was, that room in the cylinderhead was very limited and the exhaust pipe had to be necked down to 32mm.

Next step was to weld up some of the tubing in order to have some bits to play around with.

Then it's time to play a bit of Lego and puzzle the bits together to ressemble an exhaust.

And that's what it looked like in the end (all in all about two weeks from the start).